VCI SPARK 1102 MOTOR

Introduction
The VCI SPARK1102 motor uses AL7075 high-strength aviation aluminum alloy material. While ensuring the structural strength, it adopts a family-style five-spoke lightweight design. The large hollow head cover reduces the mass while enhancing the heat dissipation capacity. Combined with the motor’s own air suction design, the motor temperature is further reduced and the operation is more stable;
It is suitable for 1S~2S indoor circle machine flight, with light weight (including line 3.3g) and sufficient thrust; it can be used for indoor free flight and for novice practice, without worrying about equipment loss;

Features
The VCI SPARK1102 motor uses Japanese original double ball bearings, which makes the motor run with less resistance, higher efficiency, faster response, and enhances the fun of flying;
The imported 0.2mm silicon steel sheet can effectively reduce eddy current loss and reduce motor heating;
The magnet uses imported N52SH, which has a special magnetic circuit design to reduce its own resistance and improve motor efficiency;
The silicone wire outlet uses PCB as a transfer, which is better than direct welding and less likely to break, and it is also convenient for players to replace other wires by themselves;
The unique anti-stripping shaft design ensures that no matter how much pressure is applied when installing the propeller, the shaft will not fall out of the head cover, and can provide excellent dynamic balancing effect;
The precisely calculated shaft length can be used to install interference fit propellers, and screws can also be used to fix the propellers to prevent the propellers and motors from slipping;
With a 3PIN 1.25mm plug, it can be quickly installed on most ESCs on the market, making installation easier and flying more fun;

Adaptation
The motor is fixed with 4 holes (refer to the appearance diagram for specific dimensions)
Ø1.5mm shaft, all conventional propellers on the market can be adapted;
With a 40mm propeller at a voltage of 1s, the maximum thrust can be outputted to 45g;
With a 40mm~2in propeller at a voltage of 2s, the maximum thrust can be outputted to 105g;
Suitable for circle machines around 75mm;

Motor accessories
M2×4 black cross screws 5PCS
M2×7 black cross screws 3PCS